Differences

This shows you the differences between two versions of the page.

--- tutorials:installing_yarp_in_debian [2019/08/22 19:00] – [Test the installation] amora
+++ tutorials:installing_yarp_in_debian [2022/09/20 00:08] (current) – external edit 127.0.0.1
@@ Line 13: / Line 13: @@
 <code bash>
-  sudo apt-get install git libace-dev libreadline6-dev libgtkmm-2.4-dev swig libopencv-highgui3.2 libopencv-core3.2 libopencv-dev cmake-curses-gui python-dev qt5-default qtmultimedia5-dev qtdeclarative5-dev qml-module-qtquick-dialogs qml-module-qt-labs-settings qml-module-qtmultimedia libopenmpi-dev qml-module-qt-labs-folderlistmodel
+  sudo apt install git libgraphviz-dev libace-dev libreadline6-dev libgtkmm-2.4-dev swig libopencv-highgui3.2 libopencv-core3.2 libopencv-dev cmake-curses-gui python-dev qt5-default qtmultimedia5-dev qtdeclarative5-dev qml-module-qtquick-dialogs qml-module-qt-labs-settings qml-module-qtmultimedia libopenmpi-dev qml-module-qt-labs-folderlistmodel libqcustomplot-dev
 </code>
@@ Line 19: / Line 19: @@
 <code bash yarp_installer.sh>
-  cd ~/local/src/
+cd ~/local/src/
-  git clone git://github.com/robotology/yarp.git
+git clone git://github.com/robotology/yarp.git
-  cd yarp
+cd yarp
-  mkdir build
+mkdir build
-  cd build
+cd build
-  cmake -D CMAKE_INSTALL_PREFIX=${HOME}/local/DIR/yarp -D YARP_COMPILE_BINDINGS=ON -D CREATE_PYTHON=ON -D YARP_USE_PYTHON_VERSION=$(echo $(python --version) | tr -d a-zA-Z[:blank:]) -D CREATE_YARPDATADUMPER=OFF -D CREATE_GUIS=ON -D ENABLE_yarpmod_opencv_grabber=ON ..
+cmake -D CMAKE_INSTALL_PREFIX=${HOME}/local/DIR/yarp -D YARP_COMPILE_BINDINGS=ON -D CREATE_PYTHON=ON -D YARP_USE_PYTHON_VERSION=$(echo $(python --version) | tr -d a-zA-Z[:blank:]) -D CREATE_YARPDATADUMPER=OFF -D CREATE_GUIS=ON -D ENABLE_yarpmod_opencv_grabber=ON YARP_COMPILE_yarpviz=ON ..
-  make -j10
+make -j10
-  make install
+make install
-  cd ~/local/DIR
+cd ~/local/DIR
-  xstow yarp
+xstow yarp
 </code>