ArcosWiki

User Tools

Site Tools

Trace: • installing_orocos_kdl_in_debian • comandos_basicos • labeler • installing_ros_melodic_inside_ubuntu_bionic_chroot • arcoslabcnc
Writing /var/lib/dokuwiki/data/meta/tutorials/camera_arm_calibration.meta failed
tutorials:camera_arm_calibration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tutorials:camera_arm_calibration [2019/11/10 17:40] – [Executing the calibration script] dgarciatutorials:camera_arm_calibration [2022/09/20 00:08] (current) – external edit 127.0.0.1
Line 53: Line 53:
     - Enable auto white Balance     - Enable auto white Balance
     - Auto Exposure Priority     - Auto Exposure Priority
 +    - Set White Balance to: 3760
   * Close ''realsense-viewer''   * Close ''realsense-viewer''
   * Remember to source tour workspace before executing the following commands.   * Remember to source tour workspace before executing the following commands.
Line 142: Line 143:
   .   .
   .   .
 +</code>
 +
 +  * Launch the static calibration script. 
 +<code bash> 
 +roslaunch oms-cylinder/oms_launcher/launch/static_calibration.launch
 +</code>
 +
 +  * This will start the calibration script. This will open a window that will show you the photos that were taken, you should see some color dots. If your data set is small, you will have to press ''ENTER'' for each image. If your data set is big, only one ''ENTER'' is required (we have no idea what is the threshold, but is seems to be around 2000 poses).
 +  * You must wait when you press ''ENTER'' and the program doesn't respond, there are some images that take longer to analyze than others. When you reach the last image, the //iamge-window-interface// will gt stuck, Do Not press ''ENTER''. Wait until the algorithm converges.
 +  * Once the algorithm converges you will see a lot of results like the one shown below. The calibration result is the first one.
 +
 +<code>
 +Did converge?: 1
 +Initial cost?: 47853.2 (pixels per dot)
 +Final cost?: 0.655122 (pixels per dot)
 +
 +BASE TO CAMERA:
 + -0.208397  -0.664739   0.717421 -0.0773392
 + -0.967382  0.0320803  -0.251281   0.220998
 +  0.144021  -0.746387  -0.649742    1.43606
 +         0          0          0          1
 +
 +--- URDF Format Base to Camera ---
 +xyz="-0.0773392 0.220998 1.43606"
 +rpy="0.854511(48.9599 deg) -2.99707(-171.719 deg) 1.35862(77.8429 deg)"
 +qxyzw="-0.593562 0.687426 -0.362827 0.208531"
 +
 +BASE TO CAMERA:
 + -0.0184899    0.999697  -0.0162778  -0.0817589
 +-0.00618554   0.0161659     0.99985    0.139854
 +    0.99981   0.0185878  0.00588475 -0.00619646
 +          0           0           0           1
 +
 +--- URDF Format Base to Camera ---
 +xyz="-0.0817589 0.139854 -0.00619646"
 +rpy="-1.87741(-107.567 deg) -1.59029(-91.1172 deg) 0.322833(18.497 deg)"
 +qxyzw="-0.48976 -0.507142 -0.502048 0.500889"
 </code> </code>
 ==== Verify that the calibration is correct ==== ==== Verify that the calibration is correct ====
  
tutorials/camera_arm_calibration.1573407616.txt.gz · Last modified: 2022/09/20 00:08 (external edit)